IPOC5086 Water Clear Urethane for Water Effects

Starting at: $123.00

Add to Cart:

Please Choose:

Water clear, semi-flexible polyurethane elastomer formulated for hand- batch or vacuum assisted processing. 
Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. OC-5080 is low viscosity and uses materials that have excellent U.V. resistant qualities.
Gel Time 15 ± 3 Minutes
Demold Time*4 ± 1 Hours
10.500  Tensile PSI
75/85 D 
345,000 Flexural PSI
Color  Clear
Processing Notes
Certain silicone rubbers, including platinum silicones, will inhibit the OC-5000 series. Tin based silicones will yield the most favorable results. It is recommended that a test plaque be cast on the outside of the silicone tool to test for compatibility.
For best results, de-air the material prior to casting, the pressurize to 60 psi until cured. If pigment has been added to the hardener component, it will separate during storage.
Agitate hardener before mixing to ensure that the formula is homogeneous